Shook Guns Part 12
Rocking the SCAR at ACTS Match
So, it's been a while since the last Shook Guns installment. Shit happens. Life goes on.
Every month I drive down to Tucson to hang with T-Murda, drink stupid amounts of beer (and sometimes 4LOKO), and shoot the ACTS Match. This is my favorite competition of all of them that I shoot, because there is always a physical exertion element, and the stages challenge you and your equipment. It was approximately 100deg F at the match yesterday (and its only fucking April...that's how fucking hard we roll in AZ), and I was hungover as fuck, yet I still managed to DOMINATE this match and take 2nd place...literally 2 seconds behind my friend Russell in overall time.
Here's what it looked like:
(in the order that I shot the match...)
STAGE 4:
This stage had the farthest target, which was a torso-sized steel plate around 100yds away. The shooter had 30 seconds to hit the plate as many times as possible, firing not more than 1 round from each position, then moving thru the obstacles. I tied a few folks for the most hits (7), and moved thru the course with ease
STAGE 1:
This stage required several relays carrying a Kettle-Bell (which was heavier than it looks) while engaging targets with rifle and then pistol. I missed a LOT on this stage, especially with the pistol, which cost me 1st place. But its hard to shoot a pistol when you are hot and sweaty and hungover and tired; which is why we train like this.
STAGE 2:
One target, two shooting positions. 10 hits needed, with no more than 10 seconds expended between shots or you had to take extra penalty shots (I didn't have to take any extra shots). Looks simple but it was pretty fucking exhausting.
STAGE 3:
Start on back, rifle unloaded. Knock down the barrels and steel plates with the empty rifle, then shoot pistol targets as they become visible.
Lots of fun this month. I will try to upload videos of future matches both here and on my youtube channel (DMFL23)
Showing posts with label DMFL. Show all posts
Showing posts with label DMFL. Show all posts
4.22.2012
8.28.2011
Shook Guns Part 11
Shook Guns Part 11:
Random Summer Enhancements & Developments
Being the AZ correspondent for C2D means being pretty fucking miserable in summer. But despite 3 months of 100-115 degree days, I've managed to stay pretty active shooting-wise. And the more I shoot, the more I try new gear and tweek existing equipment. So here's some of the new things I've been playing with this summer....
Kahr P380 (actual size shown):
I've always wanted one of these to replace the ratty (& unreliable) Keltec P3AT I've had since 2003, but the price is ridiculous.
So when my shop bought this used one at a crazy low price I had to scoop it up.
My ONLY complaint is the lack of a pocket clip like my Keltec had...I'm still searching for the right holster so that I'll actually carry it.
Surefire 60 round AR15 Magazine:
I've been waiting for these to hit the streets since January, so naturally I snagged the first one I came across. Utilizing a quad-stack design, it holds 60rds of 5.56mm without adding too much length over a standard USGI 30rd mag (shown for comparison)
It has hiccupped a few times, so it's not 100% reliable, but when it runs it's awesome.
EXO/NiB-X Finish:
WMD Guns out of Florida is now offering this refinishing service on many pistols and AR components. It is a Nickle-Boron coating that is slick to the touch, but requires no lubrication (supposedly...)
I had this G19 done to test it out, and have since sent a few more pieces out. Also upgraded on both of my carry guns are the new Trijicon HD night sights, with a much more visible front post during daytime use.
Rounding it out is the Raven Concealment Holster (this one accomodates a pistol-mounted light and extended/threaded barrel), which are pricy and take FOREVER to get, but seem to be worth the hassle. I liked this one so much I got another one immediately after....
Satanic SBR Upgrades:
This gun is damn-near perfect, so I rarely chance much on it. However, to shave weight, it is now sporting a Magpul CTR stock, Daniel Defense front & rear sights, and an Aimpoint T1 Micro on a DD Mount (my new favorite optic). Also upgraded the LED on the Surefire Scout Light to the new K2XC head (=BRIGHT!)
SCAR Mods:
There are very few aftermarket mods for the SCAR rifles, but I've finally gotten them both set up how I like them....
I'm now running a T1 Micro on the SCAR-16 as well, and using a Streamlight TLR-1S mounted over the barrel on the PWS Rail Extension. Everything else is the same as before.
The SCAR-17 finally has its own optic, the Trijicon ACOG TA11J-308. A perfect optic for this rifle. Also recently installed the Branham Tactical Rail Extension; much shorter than the PWS rail on my 16, but just enough extra length to cover the gas block. The sling is the Blue Force Gear Vickers Sling, which I swap between the 2.
and FINALLY, due to the above mods...I was comfortable enough to try the SCAR-17 out at a local match. It went pretty well, all things considered. Most importantly: the gun runs like a champ.
Enjoy
Random Summer Enhancements & Developments
Being the AZ correspondent for C2D means being pretty fucking miserable in summer. But despite 3 months of 100-115 degree days, I've managed to stay pretty active shooting-wise. And the more I shoot, the more I try new gear and tweek existing equipment. So here's some of the new things I've been playing with this summer....
Kahr P380 (actual size shown):
I've always wanted one of these to replace the ratty (& unreliable) Keltec P3AT I've had since 2003, but the price is ridiculous.
So when my shop bought this used one at a crazy low price I had to scoop it up.
My ONLY complaint is the lack of a pocket clip like my Keltec had...I'm still searching for the right holster so that I'll actually carry it.
Surefire 60 round AR15 Magazine:
I've been waiting for these to hit the streets since January, so naturally I snagged the first one I came across. Utilizing a quad-stack design, it holds 60rds of 5.56mm without adding too much length over a standard USGI 30rd mag (shown for comparison)
It has hiccupped a few times, so it's not 100% reliable, but when it runs it's awesome.
EXO/NiB-X Finish:
WMD Guns out of Florida is now offering this refinishing service on many pistols and AR components. It is a Nickle-Boron coating that is slick to the touch, but requires no lubrication (supposedly...)
I had this G19 done to test it out, and have since sent a few more pieces out. Also upgraded on both of my carry guns are the new Trijicon HD night sights, with a much more visible front post during daytime use.
Rounding it out is the Raven Concealment Holster (this one accomodates a pistol-mounted light and extended/threaded barrel), which are pricy and take FOREVER to get, but seem to be worth the hassle. I liked this one so much I got another one immediately after....
Satanic SBR Upgrades:
This gun is damn-near perfect, so I rarely chance much on it. However, to shave weight, it is now sporting a Magpul CTR stock, Daniel Defense front & rear sights, and an Aimpoint T1 Micro on a DD Mount (my new favorite optic). Also upgraded the LED on the Surefire Scout Light to the new K2XC head (=BRIGHT!)
SCAR Mods:
There are very few aftermarket mods for the SCAR rifles, but I've finally gotten them both set up how I like them....
I'm now running a T1 Micro on the SCAR-16 as well, and using a Streamlight TLR-1S mounted over the barrel on the PWS Rail Extension. Everything else is the same as before.
The SCAR-17 finally has its own optic, the Trijicon ACOG TA11J-308. A perfect optic for this rifle. Also recently installed the Branham Tactical Rail Extension; much shorter than the PWS rail on my 16, but just enough extra length to cover the gas block. The sling is the Blue Force Gear Vickers Sling, which I swap between the 2.
and FINALLY, due to the above mods...I was comfortable enough to try the SCAR-17 out at a local match. It went pretty well, all things considered. Most importantly: the gun runs like a champ.
Enjoy
6.18.2011
Shook Guns Part 9
Shook Guns Part 9:
Fun with SAWs
After my corporate reprimand at C2D HQ earlier this month, I was given the ultimatum to deliver a new Shook Guns post or else take up that job offer for Martha Stewart Living Magazine Online...
So I was gonna do a profile of this slick new AR I built up recently:
But while we were at the ACTS match in Tucson today we ran into this little gem and suddenly my gun paled in comparison:
Yup, that's a real-deal SAW. Full-auto & all that. And dude was nice enough to let us play with it. Fortunately we had resident expert Matt on hand to give us a quick how-to first...
and to show us how a man does it....
too bad we didn't have any belts, but 30 round mags are plenty fun too...
I'm glad I didn't sleep off that hangover this morning and instead spent my day out in the sun sweating (and drooling) on someone's belt-fed machinegun.
Fun with SAWs
After my corporate reprimand at C2D HQ earlier this month, I was given the ultimatum to deliver a new Shook Guns post or else take up that job offer for Martha Stewart Living Magazine Online...
So I was gonna do a profile of this slick new AR I built up recently:
But while we were at the ACTS match in Tucson today we ran into this little gem and suddenly my gun paled in comparison:
Yup, that's a real-deal SAW. Full-auto & all that. And dude was nice enough to let us play with it. Fortunately we had resident expert Matt on hand to give us a quick how-to first...
and to show us how a man does it....
too bad we didn't have any belts, but 30 round mags are plenty fun too...
I'm glad I didn't sleep off that hangover this morning and instead spent my day out in the sun sweating (and drooling) on someone's belt-fed machinegun.
2.13.2011
Shook Guns Part 6
Shook Guns Part 6:
Continued SCARification
In the last installment of Shook Guns, we were introduced to the 308 powerhouse that is the FNH SCAR-17S. After having its glorious presence in my safe for a few weeks, I realized that even after I acquired some more mags for it, I'd never shoot it as much as my 5.56mm AR15 carbines. Why? Because the majority of my shooting is either in competitions (where 308 is disadvantageous) or training classes (where the co$t of shooting 1000+ rounds in a weekend makes 308 prohibitive). So my dilemma was, I wanted to have this badass gun for the end of the world, and be proficient with it, but I knew I'd never dedicate the time and money to train with it.
The solution?
Buy another SCAR, in 5.56mm...
Luckily for me, there was recently a batch of SCAR-16s imported that had "Factory Blemished" anodizing on the upper receiver. What that means is that these 100% functional and warrantied rifles look ugly, but are several hundred dollars less than normal. I actually kind of like the blems, and the worst case scenario is it becomes a candidate for a camo paint job...
I won't go into details about the SCAR-16S because it is identical in form and function to the 17S, other than being a bit smaller and lighter. It uses standard AR15 mags (i have a few (hundred) of those laying around...), and gives me a cheaper platform to learn the nuances of the SCAR family. Fortunately, there was a Rifle/Shotgun match at Rio Salado Sportsmen's Club in Mesa AZ the day after I got this, so I was able to test it out on targets from 0 to 250 yards.
I was shooting under an alias (can't have too many of those...), but a look at the results shows me in the top 10 for every stage and overall (as well as 3rd in my division).
Video from the CQB Stage:
Random Pics from the match:
bonus vid: (suppressed full-auto M4 action)
it got hot enough to burn the finish off of his silencer:
Continued SCARification
In the last installment of Shook Guns, we were introduced to the 308 powerhouse that is the FNH SCAR-17S. After having its glorious presence in my safe for a few weeks, I realized that even after I acquired some more mags for it, I'd never shoot it as much as my 5.56mm AR15 carbines. Why? Because the majority of my shooting is either in competitions (where 308 is disadvantageous) or training classes (where the co$t of shooting 1000+ rounds in a weekend makes 308 prohibitive). So my dilemma was, I wanted to have this badass gun for the end of the world, and be proficient with it, but I knew I'd never dedicate the time and money to train with it.
The solution?
Buy another SCAR, in 5.56mm...
Luckily for me, there was recently a batch of SCAR-16s imported that had "Factory Blemished" anodizing on the upper receiver. What that means is that these 100% functional and warrantied rifles look ugly, but are several hundred dollars less than normal. I actually kind of like the blems, and the worst case scenario is it becomes a candidate for a camo paint job...
I won't go into details about the SCAR-16S because it is identical in form and function to the 17S, other than being a bit smaller and lighter. It uses standard AR15 mags (i have a few (hundred) of those laying around...), and gives me a cheaper platform to learn the nuances of the SCAR family. Fortunately, there was a Rifle/Shotgun match at Rio Salado Sportsmen's Club in Mesa AZ the day after I got this, so I was able to test it out on targets from 0 to 250 yards.
I was shooting under an alias (can't have too many of those...), but a look at the results shows me in the top 10 for every stage and overall (as well as 3rd in my division).
Video from the CQB Stage:
Random Pics from the match:
bonus vid: (suppressed full-auto M4 action)
it got hot enough to burn the finish off of his silencer:
Subscribe to:
Posts (Atom)
